Gene's Water and Sewer | Twin Cities Water & Sewer Systems

If you’re looking to have sewer line repairs performed, you usually have the following options: You can have the sewer line relined You can replace the entire pipe However, these are always easy or cheap. To figure out the best option, contact Minnesota sewer repair contractor Gene’s Water & Sewer at www.GenesWaterAndSewer.com . 

Here are some of the more commonly asked questions we get about trenchless sewer repair : What is trenchless sewer repair? It’s also known as “ no dig sewer repair ,” and allows sewer repairs to be made without trenches or holes being dug. How does it work? There are three main steps: sewer cameras evaluate the lines to determine how to resolve the problem; specialized equipment then cleans the lines; and finally, an epoxy liner is installed within the existing pipe. What are the benefits? A smooth and seamless pipe is created within the pipe, and is better because roots and calcification can’t affect the pipe. Minnesota sewer repair company Gene’s Water & Sewer can help you with all your sewer needs. Contact us today by visiting www.GenesWaterAndSewer.com . 

Here are some more of the septic systems questions Gene’s Water and Sewer gets: How does a septic system work? The system contains a holding tank where natural bacterial action disintegrates human waste into environmentally acceptable components. Do I have to use a certain kind of toilet paper? No. Most toilet papers break down quickly and easily. Tissues, however, don’t easily break down and shouldn’t be flushed into the toilet. How do I know if my system needs repaired? Your septic system will give off clues, like muddy soil or pools of wastewater around the tanks; or sewage smells around the tank or inside the house. Contact a septic system contractor right away. Do I really need to take care of my system? You should if you don’t want smells or to spend a lot of money. Pumping your system costs on average $150 to $200. A new system can cost up to $40,000. How do I find out my tank’s capacity? Check with your local Environmental Health Office to see if they have your system’...

Septic system owners ask the Gene’s Water and Sewer staff a lot of questions. Here are the most common: How do I know if I own a good septic system? There are a few telltale signs of bad septic systems . Here are the most frequent: Incorrect Riser and Filter Positioning: Older septic tanks were built without allowing access to risers, as the tanks were buried completely under the lawn. Newer systems were built to allow access risers with an access filter. Cheaper systems are built without the filter. Missing Control Panel: True subpanels should be located within 50 feet of the system and allows access to killing the power should it be necessary. Unfortunately, electric inspectors often skip over septic systems, and some installers know this and install cheaper alarm boxes. Missing Controls: A time counter will tell homeowners how long the system has been running, and some won’t install this, seeing it as a luxury item. The information it provides, however, is critical to diagnosin...

You’ve just woken up, cleared your sleepy eyes and are heading to the shower when you see waste from your septic system has overflowed. It’s not a problem you need, but you’ll need to address it as quickly as possible before what could be a minor problem turns into a major one. Clogs Clogs are the most common problem septic systems have. You might assume the worst about your septic tank , but don’t worry until you have cause to. First, try running a plumber’s snake down what you think is the clogged line. If only one fixture, like a sink or toilet, is backed up and everything is in working order, then it’s only that fixture line and not your main one. If you’ve try unclogging every line and are still backed up, you’ll want to call a septic system repair company and have them dig up the tanks to expose the lids. You should never do this yourself as septic systems contain hazardous gases and materials. The contractor should see if the liquid levels are at or above the inlet level. I...

Many residents of rural areas don’t have connected water and sewer systems , but wells and septic systems . These systems aren't difficult to take care of, thanks to upgrades present in modern technologies. By following a few easy steps, you can ensure your septic system operates properly for years to come. Watch rainwater A soggy and wet septic drainfield won’t properly handle liquid waste, leaving it unabsorbed and not neutralized. You’ll need to plan things like landscaping, gutters and drains to divert away water from the drainfield. Don’t overload One of the biggest reasons for septic system repairs is an overloaded system. Make sure your system and drainfield aren’t overloaded by checking regularly for leaks from toilets and faucets, and making necessary repairs. Aerators and flow-reduction nozzles on faucets and showers will help lower water consumption, as will reduce water levels for small laundry loads. Keep trees away Another reason to call for repairs is root d...

Have questions about water and sewer repairs ? Unsure what’s causing your water and sewer issues? If you have questions, you need to Ask the Expert at Gene’s Water & Sewer . We were asked, “What could be causing waste water flow to be slowed or stopped ("sewage back-up")?” The answer is that this issue is caused most often by a clogged, broken or displaced sewer pipe between the building and the main. To repair, Gene's Water & Sewer will most often suggest an attempt at cleaning followed by a video camera inspection which will identify the cause and help select the best repair option. Once we have the results of our inspection, we will do a cost/benefit analysis and review the results with you before beginning work. The cost of the video inspection will be applied to the repair if we do the work. We are well experienced in all things water and sewer, and want to work for you. Call us today at 612.781.3737 or visit www.GenesWaterAndSewer.com now.